Multitech Microprofessor MPF-1

From: Luigi Serrantoni <luigi.serrantoni_at_tin.it>
Date: Mon Dec 1 12:18:38 2003

----- Original Message -----
From: "Alberto Rubinelli - A2 Sistemi" <alberto_at_a2sistemi.it>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk_at_classiccmp.org>
Sent: Friday, November 28, 2003 4:22 PM
Subject: RE: Multitech Microprofessor MPF-1


> > I've a multitech microprofessor MPF-1
> > I've found on the lee davison site the basic eprom and i've
> > downloaded/programmed an eprom/installed on my MPF-1
> > but i don't know the starting address from where to start the basic :-(
> > of course i tried from the beginning of the eprom but without success
> > anyone have idea of wich is the starting address? or have any
> > manual/magazine article about this MPF basic?
>
> You can try to find a DI (disable interrupts) instruction : normally code
> start with it.
>
> Alberto

Bye Alberto, you are here too !!?!?!
Thanks a lot for your suggestion
I tried all the DI address as starting address but unfortunally none of them
start the basic
but I've found an address that starts a digital watch! funny!
anyway thank a lot!
bye
Luigi
Received on Mon Dec 01 2003 - 12:18:38 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:49 BST