-- adrian/witchy www.binarydinosaurs.co.uk - the online computer museum www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o( > -----Original Message----- > From: cctalk-bounces_at_classiccmp.org > [mailto:cctalk-bounces_at_classiccmp.org]On Behalf Of Luigi Serrantoni > Sent: 01 December 2003 18:19 > To: alberto_at_a2sistemi.it; General Discussion: On-Topic and Off-Topic > Posts > Subject: Re: Multitech Microprofessor MPF-1 > > > > ----- Original Message ----- > From: "Alberto Rubinelli - A2 Sistemi" <alberto_at_a2sistemi.it> > To: "General Discussion: On-Topic and Off-Topic Posts" > <cctalk_at_classiccmp.org> > Sent: Friday, November 28, 2003 4:22 PM > Subject: RE: Multitech Microprofessor MPF-1 > > > > > I've a multitech microprofessor MPF-1 > > > I've found on the lee davison site the basic eprom and i've > > > downloaded/programmed an eprom/installed on my MPF-1 > > > but i don't know the starting address from where to start the > basic :-( > > > of course i tried from the beginning of the eprom but without success > > > anyone have idea of wich is the starting address? or have any > > > manual/magazine article about this MPF basic? > > > > You can try to find a DI (disable interrupts) instruction : > normally code > > start with it. > > > > Alberto > > Bye Alberto, you are here too !!?!?! > Thanks a lot for your suggestion > I tried all the DI address as starting address but unfortunally > none of them > start the basic > but I've found an address that starts a digital watch! funny! > anyway thank a lot! > bye > Luigi >Received on Tue Dec 02 2003 - 13:09:50 GMT
This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:49 BST