> -----Original Message-----
> From: cctalk-bounces_at_classiccmp.org
> [mailto:cctalk-bounces_at_classiccmp.org]On Behalf Of John Lawson
> Sent: 29 December 2003 00:11
> To: cctalk_at_classiccmp.org
> Subject: DECServer 90L+ startup help
>
> I have a pair (3 actually) of the above terminal servers - I have them
> cabled up, yet the two I have connected seem not to play well together...
> the remote terminal (a VT220) displays :
>
> >XDS90L-321, Connection Not Established - Network Not Connected
Have you got a proper thinwire segment between all of them? The one thing
that always caught my customers out was the end connections MUST be t-pieces
with 50 ohm terminators, even on the servers. If you've got a DS90 on its
own it must have a t-piece with 2 terminators on its thinwire port, even if
its the stackable module. DS90L+'s are dumb enough not to require anything
else.
cheers
--
adrian/witchy
www.binarydinosaurs.co.uk - the online computer museum
www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o(
Received on Sun Dec 28 2003 - 18:28:10 GMT