Sorry about that. Forgot the sign-up B-S. If you want
anything I could download and send it to you. Msgs
arrive like ordinary mail so I rarely sign in unless it's
to download a file. I guess I have their cookie and it
works for me like any ordinary site except for an
occasional request for password. I could copy the file
listings and pass them on to you. One of these years
I'm going to get off my keister and build a site with some
of my stuff on it.
Lawrence
Lawrence
On 13 Feb 2003, , Sue & Francois wrote:
> Problem here....
> I don't want to sign up with yahoo. So I can't read the
> archives or get to the files sections. Otherwise I would be
> interested in getting the setup and boot disk files for my
> 1520. ------- Brief Google search
> http://www.ari-service.com/support/file/dir.asp?VirtPath=/ft
> p/grid/ Has a set of utilities ready to download Have fun
> Francois Minnesota
>
> ----- Original Message -----
> From: "Lawrence Walker" <lgwalker_at_mts.net>
> To: "Ricky" <ligkig_at_hotmail.com>; <cctalk_at_classiccmp.org>
> Sent: Thursday, February 13, 2003 9:47 AM Subject: Re:
> Gridcase 1530
>
>
> > This could be a problem with your Connor HD, the ones in
> > the Grid 15xx are notoriously unreliable. Go to
> >
> > http://groups.yahoo.com/group/RuGRiD-Laptop/
> >
> > In the files section are set-up and boot disk files which
> > would allow you to boot from floppy and at least see if
> > the HD is recognized. If not you need to replace your HD
> > with one of the 3 the 1530 recognizes. There is also a
> > file to alter the BIOS to allow a larger Connor HD than
> > the biggest 80meg one to be installed.
> > I regularly give my 2 Grid 1520s a sharp rap or twist to
> > unstick the HD. :^) I haven't anything of value on it that
> > I can't replace with a backup and haven't yet found a
> > cheap Connor with the Grid specs. YMMV
> >
> > Lawrence
> >
> >
> >
> > On 11 Feb 2003, , Ricky wrote:
> >
> > > Dear Sir,
> > >
> > > Greetings form Geolab! We are formed in 1991 as an
> > > independent multi-discplinary Geotechnical,
> > > Environmental and Construction Materials Service firm
> > > providing engineering and scientific consulting,
> > > subsurface exploration and testing services to both
> > > public and private sector clients.
> > >
> > > At this moment, we are using Gridcase 1530 (386) for the
> > > purpose of doing our Pile Drive Analysis Test (PDA
> > > Test). Due to this computer is an old unit, we
> > > frequently facing problem that bother us once we turn on
> > > the computer. The monitor always promp the error as
> > > stated below:
> > >
> > > "Invalid configuration Information : Code 02
> > >
> > > Strike F1 key to continue"
> > >
> > > However, once we strike the F1 key, another error will
> > > occur named, Disk Boot Errores.
> > >
> > > We really appreciate if you can help us out in this
> > > matter as soon as possible, this computer is really
> > > valuable for our department. We hope to hear from you
> > > soon.
> > >
> > > Thank you for your kind attention.
> > >
> > > Regards,
> > >
> > > Ricky
> > >
> > > Engineer
> > >
> > > ligkig_at_hotmail.com
> >
> >
> > lgwalker_at_ mts.net
lgwalker_at_ mts.net
Received on Fri Feb 14 2003 - 02:04:00 GMT