Gridcase 1530

From: Sue & Francois <fauradon_at_frontiernet.net>
Date: Thu Feb 13 21:26:00 2003

Problem here....
I don't want to sign up with yahoo. So I can't read the archives or get to
the files sections.
Otherwise I would be interested in getting the setup and boot disk files
for my 1520.
------- Brief Google search
http://www.ari-service.com/support/file/dir.asp?VirtPath=/ftp/grid/
Has a set of utilities ready to download
Have fun
Francois
Minnesota

----- Original Message -----
From: "Lawrence Walker" <lgwalker_at_mts.net>
To: "Ricky" <ligkig_at_hotmail.com>; <cctalk_at_classiccmp.org>
Sent: Thursday, February 13, 2003 9:47 AM
Subject: Re: Gridcase 1530


> This could be a problem with your Connor HD, the ones
> in the Grid 15xx are notoriously unreliable. Go to
>
> http://groups.yahoo.com/group/RuGRiD-Laptop/
>
> In the files section are set-up and boot disk files which
> would allow you to boot from floppy and at least see if
> the HD is recognized. If not you need to replace your HD
> with one of the 3 the 1530 recognizes. There is also a file
> to alter the BIOS to allow a larger Connor HD than the
> biggest 80meg one to be installed.
> I regularly give my 2 Grid 1520s a sharp rap or twist to
> unstick the HD. :^) I haven't anything of value on it that I
> can't replace with a backup and haven't yet found a cheap
> Connor with the Grid specs. YMMV
>
> Lawrence
>
>
>
> On 11 Feb 2003, , Ricky wrote:
>
> > Dear Sir,
> >
> > Greetings form Geolab! We are formed in 1991 as an
> > independent multi-discplinary Geotechnical, Environmental
> > and Construction Materials Service firm providing
> > engineering and scientific consulting, subsurface
> > exploration and testing services to both public and private
> > sector clients.
> >
> > At this moment, we are using Gridcase 1530 (386) for the
> > purpose of doing our Pile Drive Analysis Test (PDA Test).
> > Due to this computer is an old unit, we frequently facing
> > problem that bother us once we turn on the computer. The
> > monitor always promp the error as stated below:
> >
> > "Invalid configuration Information : Code 02
> >
> > Strike F1 key to continue"
> >
> > However, once we strike the F1 key, another error will occur
> > named, Disk Boot Errores.
> >
> > We really appreciate if you can help us out in this matter
> > as soon as possible, this computer is really valuable for
> > our department. We hope to hear from you soon.
> >
> > Thank you for your kind attention.
> >
> > Regards,
> >
> > Ricky
> >
> > Engineer
> >
> > ligkig_at_hotmail.com
>
>
> lgwalker_at_ mts.net
Received on Thu Feb 13 2003 - 21:26:00 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:54 BST