iUP-201 PC software

From: Dwight K. Elvey <dwightk.elvey_at_amd.com>
Date: Mon Jul 7 12:31:00 2003

Hi Tim
 If someone else doesn't get you anything, I can write something
for you. I think you can easily drive it from the printer port
with an adapter cable( I've not totaled the signals needed ).
 Some of the newer boards require sequencing that I don't have
information on but for cards that program things like 1702A's
or 2708's, I have info on the sequences needed.
Dwight

>X-Authentication-Warning: huey.classiccmp.org: mailnull set sender to
cctalk-admin using -f
>From: "Tim Shaw" <T.Shaw_at_corp.amc.edu.au>
>To: cctalk_at_classiccmp.org
>Subject: iUP-201 PC software
>
>Hi Robert
>I found your request for modules for a iUP201 Universal Programmer.
>I have just dusted off a iUP-201 we have had sitting on a shelf for as long
>as anyone here can remember.
>I cant help you with modules but I would be very grateful if you could help
>me with software to drive it from a PC.
>I need to use it to read the contents of a 2732 EPROM from an engine volume
>generator I hope to update.
>
>regards
>
>Tim Shaw T.Shaw_at_corp.amc.edu.au
>Senior Technical Officer (Elect) +61-3-63354805 Ph
>Technical Services +61-3-63266493 Fax
>Australian Maritime College www.amc.edu.au
Received on Mon Jul 07 2003 - 12:31:00 BST