iUP-201 PC software

From: Joe <rigdonj_at_cfl.rr.com>
Date: Mon Jul 7 16:46:13 2003

Hey Dwight,

   If you write something, I'd like to get a copy too. I finally got a
working iuP 201. BTW I've been thinking of making a PC interface for the
UPP 103. I've finally got some docs on it and found out that it only uses
about six commands; three writes, two reads and one read status. I don't
know what they are but it should be too hard to grab the data with a logic
analyzer. I'm not planning on doing it anytime soon, right now I'm busy
re-building some MDSs.

   BTRW do you know if there was ever any software written for ISIS to
operate the iUP 201?

      Joe

At 10:26 AM 7/7/03 -0700, you wrote:
>Hi Tim
> If someone else doesn't get you anything, I can write something
>for you. I think you can easily drive it from the printer port
>with an adapter cable( I've not totaled the signals needed ).
> Some of the newer boards require sequencing that I don't have
>information on but for cards that program things like 1702A's
>or 2708's, I have info on the sequences needed.
>Dwight
>
>>X-Authentication-Warning: huey.classiccmp.org: mailnull set sender to
>cctalk-admin using -f
>>From: "Tim Shaw" <T.Shaw_at_corp.amc.edu.au>
>>To: cctalk_at_classiccmp.org
>>Subject: iUP-201 PC software
>>
>>Hi Robert
>>I found your request for modules for a iUP201 Universal Programmer.
>>I have just dusted off a iUP-201 we have had sitting on a shelf for as long
>>as anyone here can remember.
>>I cant help you with modules but I would be very grateful if you could help
>>me with software to drive it from a PC.
>>I need to use it to read the contents of a 2732 EPROM from an engine volume
>>generator I hope to update.
>>
>>regards
>>
>>Tim Shaw T.Shaw_at_corp.amc.edu.au
>>Senior Technical Officer (Elect) +61-3-63354805 Ph
>>Technical Services +61-3-63266493 Fax
>>Australian Maritime College www.amc.edu.au
Received on Mon Jul 07 2003 - 16:46:13 BST