There was a program for both ISIS and DOS called "IPPS". Now to find
it...
George Rachor
=========================================================
George L. Rachor Jr. george_at_rachors.com
Hillsboro, Oregon
http://rachors.com
United States of America Amateur Radio : KD7DCX
On Mon, 7 Jul 2003, Joe wrote:
> Hey Dwight,
>
> If you write something, I'd like to get a copy too. I finally got a
> working iuP 201. BTW I've been thinking of making a PC interface for the
> UPP 103. I've finally got some docs on it and found out that it only uses
> about six commands; three writes, two reads and one read status. I don't
> know what they are but it should be too hard to grab the data with a logic
> analyzer. I'm not planning on doing it anytime soon, right now I'm busy
> re-building some MDSs.
>
> BTRW do you know if there was ever any software written for ISIS to
> operate the iUP 201?
>
> Joe
>
> At 10:26 AM 7/7/03 -0700, you wrote:
> >Hi Tim
> > If someone else doesn't get you anything, I can write something
> >for you. I think you can easily drive it from the printer port
> >with an adapter cable( I've not totaled the signals needed ).
> > Some of the newer boards require sequencing that I don't have
> >information on but for cards that program things like 1702A's
> >or 2708's, I have info on the sequences needed.
> >Dwight
> >
> >>X-Authentication-Warning: huey.classiccmp.org: mailnull set sender to
> >cctalk-admin using -f
> >>From: "Tim Shaw" <T.Shaw_at_corp.amc.edu.au>
> >>To: cctalk_at_classiccmp.org
> >>Subject: iUP-201 PC software
> >>
> >>Hi Robert
> >>I found your request for modules for a iUP201 Universal Programmer.
> >>I have just dusted off a iUP-201 we have had sitting on a shelf for as long
> >>as anyone here can remember.
> >>I cant help you with modules but I would be very grateful if you could help
> >>me with software to drive it from a PC.
> >>I need to use it to read the contents of a 2732 EPROM from an engine volume
> >>generator I hope to update.
> >>
> >>regards
> >>
> >>Tim Shaw T.Shaw_at_corp.amc.edu.au
> >>Senior Technical Officer (Elect) +61-3-63354805 Ph
> >>Technical Services +61-3-63266493 Fax
> >>Australian Maritime College www.amc.edu.au
Received on Mon Jul 07 2003 - 19:53:35 BST