Industrial VAX 630 info wanted...

From: Kevin Handy <kth_at_srv.net>
Date: Tue Mar 25 11:30:00 2003

David Woyciesjes wrote:

> Well, I hooked my VT420 (9600.8.N.1) to the VAX, and got no reaction on
>the terminal. The LED diplay on the CPU card started at F, then flipped
>A, and sat there.
> On the CPU card, there are two switches, and I don't know what they do.
>I've tried different switch combinations, to no avail...
>
>http://mywebpages.comcast.net/dwoyciesjes/Mvc-113f.jpg
>
> On the left side is a 2 position switch, upper position has a dot
>inside a circle, and the lower position has the dot above the circle.
>That's the setting it came at. There is also a triangle, pointed down,
>inside a circle immediatley below the switch.
> On the right is a 3 position rotary switch.1st position is a little
>face type of character, second is an arrow pointing right (this is
>selected), and the third is a circle with a T inside of it. There is an
>arrowhead on the circle, makes me think it's a looping test setting?
>
> Can anybody help me out quick to decipher these? I'm trying to get this
>booted, to see what's on it, before John picks it up...
>
This site has a picture and a short description of the panel.

http://www.telnet.hu/hamster/dr/ka630.html
Received on Tue Mar 25 2003 - 11:30:00 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:13 BST