STAG Electronics Ganged Programmer

From: Joe <rigdonj_at_cfl.rr.com>
Date: Fri May 16 14:54:17 2003

   I have a Stag 39M100 with one plug-in for programming EPROMs and another
for programming embedded micro-processors. I found the docs for it on a
site in France. Stag is utterly worthless when it comes to support. I'll
never buy or recommend anything from them. Glen G has a bigger gang
programmer and I think he has a real manual for it.

     Joe

At 07:29 PM 5/16/03 +0100, you wrote:
>At 09:50 15/05/2003 +0100, Witchy wrote:
>
>>Made by STAG in 1984, it's got a model number of PP16A and features a socket
>>for a cartridge containing the master EPROM and a module containing 16 EPROM
>>sockets for new EPROMS, so obviously you feed it a master and it makes up to
>>16 copies.
>>
>>Under the hood it's actually a 6809 based micro with 2K RAM and the board
>>has holes ready for 2 COMM sockets, so does anyone remember these beasts?
>>It'd be great if I could add on the serial ports and talk to it using a
>>PeeCee for making ROM backups
>
>
>I remember these being in use at Ferranti, when I was an apprentice there
>about 20 years ago .. (so age fits!) AFAICR we only ever used them in
>stand-alone mode as a bulk copier. They were also RENTED, from Livingston
>Hire, if I recall correctly, (certainly we used them a lot) so there may be
>a chance you can find some old docs from them.
>
>Rob
Received on Fri May 16 2003 - 14:54:17 BST