Fw: Grandfather system RTE6/VM?

From: Jay West <jwest_at_classiccmp.org>
Date: Sun Nov 16 20:09:05 2003

----- Original Message -----
From: "Jay West" <jwest_at_classiccmp.org>
To: "Ed Sharpe" <esharpe_at_uswest.net>
Sent: Sunday, November 16, 2003 8:08 PM
Subject: Re: Grandfather system RTE6/VM?


> You don't have to pop out the chips, just pull out the rom card, A1 or A2,
I
> think it's A2 going from memory. Look at the card and see what numbers are
> on the white and gold chips that are socketed :)
>
> J
> ----- Original Message -----
> From: "Ed Sharpe" <esharpe_at_uswest.net>
> To: "General Discussion: On-Topic Posts Only" <cctech_at_classiccmp.org>
> Cc: <jwest_at_classiccmp.org>
> Sent: Sunday, November 16, 2003 5:31 PM
> Subject: Re: Grandfather system RTE6/VM?
>
>
> > well I have the set that is in the 2100 in the 2000 access system
here.
> > not a loose set. ( shall we call it embedded?)
> >
> > I would live in fear of poping them out though......
> >
> > ed!
> >
> > ----- Original Message -----
> > From: "Jay West" <jwest_at_classiccmp.org>
> > To: "ed sharpe" <esharpe_at_uswest.net>; "General Discussion: On-Topic and
> > Off-Topic Posts" <cctalk_at_classiccmp.org>
> > Sent: Sunday, November 16, 2003 12:07 PM
> > Subject: Re: Grandfather system RTE6/VM?
> >
> >
> > > You're quite sure you have a set of the IOP firmware for the 2100 cpus
> Ed?
> > > If so, good to know. I really want to get mine backed up as they seem
to
> > be
> > > the only ones around. However, I got a new prom burner and it is
acting
> > very
> > > flaky so I'm a little afraid to put my chips in it.
> > >
> > > Jay
> > > ----- Original Message -----
> > > From: "ed sharpe" <esharpe_at_uswest.net>
> > > To: "General Discussion: On-Topic and Off-Topic Posts"
> > > <cctalk_at_classiccmp.org>; <classiccmp_at_classiccmp.org>
> > > Sent: Saturday, November 15, 2003 11:16 PM
> > > Subject: Re: Grandfather system RTE6/VM?
> > >
> > >
> > > > we have a set too Al, but alas no way to read them....
> > > > It is up to you Jay!
> > > > ed!
> > > > ----- Original Message -----
> > > > From: "Al Kossow" <aek_at_spies.com>
> > > > To: <classiccmp_at_classiccmp.org>
> > > > Sent: Saturday, November 15, 2003 5:54 PM
> > > > Subject: Re: Grandfather system RTE6/VM?
> > > >
> > > >
> > > > >
> > > > > > I'll try to dump the microcode proms this weekend
> > > > >
> > > > > Dumps of the firmware is now up at
> www.bitsavers.org/HP/1000_firmware
> > > > > including the IOP firmware the 21MX.
> > > > >
> > > > > Jay, since you appear to have the only surviving copy of the 2100
> IOP
> > > > > firmware, it would be good to get the proms read.
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> >
>
Received on Sun Nov 16 2003 - 20:09:05 GMT