Grandfather system RTE6/VM?

From: ed sharpe <esharpe_at_uswest.net>
Date: Sun Nov 16 21:20:59 2003

no you have to pop them out to put them in a prom reader!

I know they are there... the system would not have worked as an access
system had they not!

we need a set of hardware manuals for the 2100... it seems though the
passing of the years the old ones I had at computer exchange Inc. let the
earth...

  I DID find though the 2100 hardware training manual # 02100-90159 while
looking at home here for the infamous DEC master Module List.... When I
retired I squirreled bits of manuals all over where I live... Most have
been added to the museum's reference library but it seems every time I go
digging I find something.new I know the 2100 processor manuals are gone
though as they were in the HP binders.... kind of hard to loose those!

ed sharpe archivist for smecc
----- Original Message -----
From: "Jay West" <jwest_at_classiccmp.org>
To: <cctalk_at_classiccmp.org>
Sent: Sunday, November 16, 2003 7:09 PM
Subject: Fw: Grandfather system RTE6/VM?


>
> ----- Original Message -----
> From: "Jay West" <jwest_at_classiccmp.org>
> To: "Ed Sharpe" <esharpe_at_uswest.net>
> Sent: Sunday, November 16, 2003 8:08 PM
> Subject: Re: Grandfather system RTE6/VM?
>
>
> > You don't have to pop out the chips, just pull out the rom card, A1 or
A2,
> I
> > think it's A2 going from memory. Look at the card and see what numbers
are
> > on the white and gold chips that are socketed :)
> >
> > J
> > ----- Original Message -----
> > From: "Ed Sharpe" <esharpe_at_uswest.net>
> > To: "General Discussion: On-Topic Posts Only" <cctech_at_classiccmp.org>
> > Cc: <jwest_at_classiccmp.org>
> > Sent: Sunday, November 16, 2003 5:31 PM
> > Subject: Re: Grandfather system RTE6/VM?
> >
> >
> > > well I have the set that is in the 2100 in the 2000 access system
> here.
> > > not a loose set. ( shall we call it embedded?)
> > >
> > > I would live in fear of poping them out though......
> > >
> > > ed!
> > >
> > > ----- Original Message -----
> > > From: "Jay West" <jwest_at_classiccmp.org>
> > > To: "ed sharpe" <esharpe_at_uswest.net>; "General Discussion: On-Topic
and
> > > Off-Topic Posts" <cctalk_at_classiccmp.org>
> > > Sent: Sunday, November 16, 2003 12:07 PM
> > > Subject: Re: Grandfather system RTE6/VM?
> > >
> > >
> > > > You're quite sure you have a set of the IOP firmware for the 2100
cpus
> > Ed?
> > > > If so, good to know. I really want to get mine backed up as they
seem
> to
> > > be
> > > > the only ones around. However, I got a new prom burner and it is
> acting
> > > very
> > > > flaky so I'm a little afraid to put my chips in it.
> > > >
> > > > Jay
> > > > ----- Original Message -----
> > > > From: "ed sharpe" <esharpe_at_uswest.net>
> > > > To: "General Discussion: On-Topic and Off-Topic Posts"
> > > > <cctalk_at_classiccmp.org>; <classiccmp_at_classiccmp.org>
> > > > Sent: Saturday, November 15, 2003 11:16 PM
> > > > Subject: Re: Grandfather system RTE6/VM?
> > > >
> > > >
> > > > > we have a set too Al, but alas no way to read them....
> > > > > It is up to you Jay!
> > > > > ed!
> > > > > ----- Original Message -----
> > > > > From: "Al Kossow" <aek_at_spies.com>
> > > > > To: <classiccmp_at_classiccmp.org>
> > > > > Sent: Saturday, November 15, 2003 5:54 PM
> > > > > Subject: Re: Grandfather system RTE6/VM?
> > > > >
> > > > >
> > > > > >
> > > > > > > I'll try to dump the microcode proms this weekend
> > > > > >
> > > > > > Dumps of the firmware is now up at
> > www.bitsavers.org/HP/1000_firmware
> > > > > > including the IOP firmware the 21MX.
> > > > > >
> > > > > > Jay, since you appear to have the only surviving copy of the
2100
> > IOP
> > > > > > firmware, it would be good to get the proms read.
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> >
>
>
Received on Sun Nov 16 2003 - 21:20:59 GMT