Wavemate Bullet info/docs needed

From: Rich Beaudry <r_beaudry_at_hotmail.com>
Date: Thu Nov 20 11:42:36 2003

Hello all,

I recently got a bare Wavemate Bullet board, and would like to get it up and
running. I received some 8" floppies with it, and they appear to be boot
disks for the board. All but one was readable on another CP/M system.

I'd like to get docs for it, or pointers to more information on the board.
It's a Z-80 based board, and has the CPU, DART, CTC, DMA, and PIO chips.
Looks like it has some RAM (16 MB8264), and some glue logic, plus a
Fairchild MB8877.

It is labeled "Wavemate (c) 1981 Rev. B Hawthorne, CA. Made in U.S.A."

There are two 10-pin headers marked "J3" and "J4", two 50-pin headers marked
"J1" and "J6", and two 34-pin headers marked "J2" and "J7". I suspect J3
and J4 are serial I/O, as the traces go to a set of 1488/1489 chips. J1 and
J2 are next to each other on the right of the board, and J7 and J6 are next
to each other on the top of the board. There's also another 34-pin header
near the top right marked "J5". There's an 8-position DIP switch labeled
"SW1". Power appears to be from a plug that loks like a typical PC-style
drive power connector. I'd like to verify the pinout, though, if possible
:-)

Curiously, there's no EPROM, nor even a socket for one. My luck, it's some
missing part :-(

I'd appreciate any help!

Thanks,
Rich B.
Received on Thu Nov 20 2003 - 11:42:36 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:20 BST