Looking for DEC DLV11J cab kits

From: Jochen Kunz <jkunz_at_unixag-kl.fh-kl.de>
Date: Sat Oct 4 03:19:35 2003

On 2003.10.04 01:04 Fred N. van Kempen wrote:

> Looking for the cab kits for the DLV11J (4-port serial) cards,
Cable, connectors, soldering Iron?

Here is the pinout:
Pin
  1 UART Clk (in or out)
  2 Signal ground
  3 Transmit Data +
  4 Transmit Data -
  5 Signal Ground
  6 INDEX (no pin)
  7 Receive Data -
  8 Receive Data +
  9 Signal Ground
 10 +12V through fuse when using -KA (current loop)
Connect pins 8, 3, and 2 for your standard 3 wire RS-232 cable.

-- 
tsch??,
       Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/

Received on Sat Oct 04 2003 - 03:19:35 BST