Unibus questions

From: Eric Smith <eric_at_brouhaha.com>
Date: Wed Sep 24 15:51:56 2003

"Doc Shipley" <doc_at_mdrconsult.com> wrote:
> Is there a reliable way to determine grant configuration without
> physical examination of the backplane?

You could pull the modules and use a multimeter or continuity tester.
Usually physical inspection is easier, though an electrical test will
be more reliable. I once had a wire-wrapped grant jumper in the
backplane go bad. I'm not sure if the problem was a break in the
conductor or a bad wrap, but it certainly looked like there was a
Received on Wed Sep 24 2003 - 15:51:56 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:26 BST