On Aug 31 2004, 0:44, Ron Hudson wrote:
> I am currently using an Imagewriter printer cable to hook up one
> device, and that
> seems to work ok, and there is no electronics there.. Perhaps the
> transformers are
> for some safety - decoupling purpose?
You have the equivalent of a point-to-point link, with Tx on one device
connected to Rx on the other. When you have things set up as a
network, all the Txs go onto a bus that connects all the Rxs. The
transformers allow the signals to combine, and separate them for each
station.
But I'd expect you could just find some proper boxes easily and cheaply
enough; they're not rare, even here in the UK.
--
Pete Peter Turnbull
Network Manager
University of York
Received on Tue Aug 31 2004 - 12:29:06 BST