Powermac 8100/80 RAM question

From: Tom Peters <tpeters_at_mixcom.com>
Date: Thu Dec 30 13:01:29 2004

I have lots of old 72-pin SIMMs laying around. What are you looking for?

At 03:37 PM 12/30/2004 +0000, you wrote:
>On Dec 30 2004, 9:09, Richard Beaudry wrote:
> > Hello all,
> >
> > I have a Powermac 8100/80 that needs a RAM upgrade. Lowendmac.com
> > says that it can handle 72-pin SIMMs, up to 32MB each. My question
>is
> > this: does it take the same 72-pin SIMMs as a PC, or does it require
> > special "mac-only" SIMMs? Google only showed people still selling
>the
> > RAM (for outrageous prices), and I couldn't get actual specs on the
> > RAM itself.
>
>Ordinary PC-type 72-pin SIMMs should be fine, but I think you need Fast
>Page Mode rather than EDO. You don't need parity, but it will do no
>harm if you have 36-bit SIMMs instead of 32-bit. lowendmac mentions
>80ns, so 70ns or 60ns will also do. I bought 4 x 32MB SIMMs about 4
>weeks ago on eBay for an SGI, which wants FPM+parity and gold contacts;
>it was quite cheap (under $20). The same seller had quite a lot that
>was non-parity, and he even mentioned Apples.
>
>
>--
>Pete Peter Turnbull
> Network Manager
> University of York


C?ad Mile F?ilte (C?ad Mile F ilte)(kaid MEE-la fall-cha), Gaelic:
"One Hundred Thousand Welcomes!"
--... ...-- -.. . -. ----. --.- --.- -...
tpeters_at_nospam.mixcom.com (remove "nospam") N9QQB (amateur radio)
"HEY YOU" (loud shouting) WEB ADDRESS http//www.mixweb.com/tpeters
43? 7' 17.2" N by 88? 6' 28.9" W, Elevation 815', Grid Square EN53wc
WAN/LAN/Telcom Analyst, Tech Writer, MCP, Cisco Certified CCNA
Received on Thu Dec 30 2004 - 13:01:29 GMT