SIMH Help

From: Curt vendel <curt_at_atarimuseum.com>
Date: Mon Feb 9 09:46:12 2004

Hi,

  I'm just trying out SIMH and I'm not quite familiar with the way it works.
I've attached an image as an RL02 to the RL0 Unit, but where do I go from
there to get it to be assigned something similar to what a real vax would
have, normally my RL02's would come up as a DLA0: and so forth, I've been
looking through the SIMH help, but I am missing something and I want to make
the drive.img file accessible as a drive in SIMH so I can access its
contents, thanks in advance for any help offered.


RL, address=20001900-20001909, vector=270, 4 units
  RL0, 5242KW, attached to d:\rl02s\disk1.img, write enabled, RL02
  RL1, 2621KW, not attached, write enabled, autosize
  RL2, 2621KW, not attached, write enabled, autosize
  RL3, 2621KW, not attached, write enabled, autosize

Curt
Received on Mon Feb 09 2004 - 09:46:12 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:42 BST