Intel iUP-201

From: Joe R. <rigdonj_at_cfl.rr.com>
Date: Wed Feb 11 12:53:23 2004

At 10:06 AM 2/11/04 -0800, you wrote:
>
>>From: K6OKL_at_aol.com
>>
>>Hello Dwight-
>>
>>Google led me to your discussion with Gilis in the Netherlands a while back
>>and
>>I thought you might be able to help with a little problem I have if you
were
>>willing.
>>
>>I borrowed an iUP-201 from a friend and it seemed to initialize OK.
After I
>>plugged
>>in a 27128 ROM to see what was in it, the unit froze and now gives a "Power
>>Supply Failure" display and won't do anything else.
>>
>>I looked inside to see what the four power supplies were up to and it
appears
>>two
>>of them turn on with commands from the F27/128 module, and were not doing
so.
>
>Hi
> I don't have enough information on the insides to help you here.
>Maybe Joe Rigdon can help. You'll need to get schematics.
>Dwight
>

  Sorry I don't have schematics either. But I do have a dead 201 so I could
use schematics too. Dave Mabry may have some. I'll check.

   Joe
Received on Wed Feb 11 2004 - 12:53:23 GMT