Everex EV-831

From: Nico de Jong <nico_at_farumdata.dk>
Date: Mon Feb 23 15:57:23 2004

Hi Joe
That sounds right. The full size QIC-36 is right.
Most of the jumps are located just above the connector. IRQ 2-7, DRQ 1-3 and
DACK 1-3.
There is also a 4-pin header (2 x 2) near the crystal (at the back / bottom)
called E1 E2 E5 E6.
I can copy the discs on some other discs, and then send them to Curt. We can
also do it the other way around.

I would appreciate your help. thanks

Nico

You can find my addres on www.farumdata.dk


----- Original Message -----
From: <TRASH3_at_splab.cas.neu.edu>
To: <cctalk_at_classiccmp.org>
Sent: Monday, February 23, 2004 6:23 PM
Subject: RE: Everex EV-831


> I have three 5.25 inch floppies that have the labels (copies):
> EVEREX EXCEL STREAMING TAPE ST 4061 VER 4.06 EV0-00830-00 MAY 24 1988.
> Disk 2 and 3 have similar labels, but are 4062 and 4063. Upon running
> the tape program on disk 1, the options for hardware are:
> Full Size QIC-36 tape controller board
> Full Size cassette tape controller board
> Half Size QIC-02 tape controller board
> Diskette and QIC-02 board
> 2/3 Size QIC-36
> Disk and QIC-36
> Disk and QIC-02
>
> The program does not give model numbers, but shows a graphic of the board
> and all the jumpers.
>
> Ya think this software will help you?
>
> Joe Heck
>
Received on Mon Feb 23 2004 - 15:57:23 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:43 BST