SS-50/SS-30 Pin Spacing

From: Patrick Rigney <patrick_at_evocative.com>
Date: Thu Feb 26 08:47:54 2004

Thanks, Michael! This is EXACTLY what I needed. --Patrick

> -----Original Message-----
> From: cctalk-bounces_at_classiccmp.org
> [mailto:cctalk-bounces_at_classiccmp.org]On Behalf Of Michael Holley
> Sent: Wednesday, February 25, 2004 5:45 PM
> To: cctalk_at_classiccmp.org
> Subject: re: SS-50/SS-30 Pin Spacing
>
>
> The pin spacing is 0.156 inch.
>
> You can get the Molex parts at Digi Key. www.digikey.com
> You can look up all the data sheets using the parts numbers at
> www.molex.com.
>
> The 10 pin right angle connector is Molex part 09-52-3101, Digi Key part
> WM3307-ND. They cost $1.57.
>
> The polarizing key is Molex part15-04-0219, Digi Key WM2402-ND. They cost
> 0.25.
>
> The round pin male header is the Molex 3192 series. The 10 pin
> unit is Molex
> part 26-20-2101. I have not found a good source, Digi-Key only
> carries the
> square pins. The square pin has more contact area (a flat side
> instead of a
> point.) The increased friction makes it more difficult to plug and unplug
> boards.
>
> I used the AMP part to build a motherboard (fartherboard?) The 12 pin
> version is cheaper then the 10 pin version. I bought 12 pin parts
> and used a
> utility knife to trim them.
>
> 10 Pin MTA 0.156 Header Assembly Straight Round Tin
> Amp # 1-640384-0
> Digi-Key# A24154-ND Price $1.37
>
> 12 Pin MTA 0.156 Header Assembly Straight Round Tin
> Amp # 1-640384-2
> Digi-Key# A26174-ND Price $0.93
>
> Michael Holley
> www.swtpc.com/mholley
>
>
>
Received on Thu Feb 26 2004 - 08:47:54 GMT