HP hardware available and wanted list

From: Jay West <jwest_at_classiccmp.org>
Date: Thu Jul 1 19:46:32 2004

You're comparing a 2100 panel to a 2114/2116. I agree with you there. I was
comparing the usability of the 2100 panel vs. the 21MX panel. I hate having
to hit "store" each time. On the 21MX, you have to hit store when changing a
register value. On the 2100, just select a different register, or hit INC M,
or hit run, and the modifications are automatically stored. To get the old
contents back, just press the register key again. Makes things much easier
for one who works on the front panel a lot.

And the front panel is used a LOT for a lot of HP diagnostics, regardless of
loader roms being present or not. Just my own personal opinion :)

Jay
----- Original Message -----
From: "Bob Shannon" <bshannon_at_tiac.net>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk_at_classiccmp.org>
Sent: Thursday, July 01, 2004 5:46 PM
Subject: Re: HP hardware available and wanted list


>
> Jay West wrote:
>
> >
> >PS - Bob, now that I've been using the 21MX front panel for a while, I
gotta
> >tell ya, I prefer using the 2100 front panel. What's this "store" button
> >crap? *GRIN*
> >
> The 2100 panel is total junk! Try a 2114 my friend, there is nothing
> that compares with HP's touch
> sensitive incandescent backlit sensors, and the hacked relay used to
> make the 'click' as if there was
> a mechanical component to the capacitive switch.
>
> But for appearance, the 2116 rules.
>
> Remember 21MX's use boot roms, the front panel is very rarely used. It
> was also HP's last front panel.
>
>
Received on Thu Jul 01 2004 - 19:46:32 BST