I'm so stupid... Was: Head Cleaners

From: Geoffrey Thomas <geoffreythomas_at_onetel.net.uk>
Date: Sat Jul 3 04:34:30 2004

Phil,
I've got the Farnell "L" series instruction book complete with cct. diag.
It doesn't mention L30B however only L30/1, L30/2 , L30/5.
I haven't got a scanner but send me your snail mail address and you can
borrow it to scan etc. for the cost of postage if no-one else has it .

Geoff.

----- Original Message -----
From: "Philip Pemberton" <philpem_at_dsl.pipex.com>
To: <cctalk_at_classiccmp.org>
Sent: Wednesday, June 30, 2004 2:35 PM
Subject: Re: I'm so stupid... Was: Head Cleaners


> I think I've still got a power supply somewhere that has a flaky 5V
> regulator. Sometimes the regulator starts up fine, then runs for hours.
Other
> times it just sits there dead - strangely enough, drumming one's fingers
on
> the casing usually gets the regulator to start. I'll fix the dry joint on
the
> PCB when my Farnell L30B bench PSU dies. Speaking of which, does anyone
have
> a service manual for the Farnell L30B power supply?
> One of these days, I'll build a custom power supply. At the very least,
the
> L30B needs its switches, one of the meters and all of the potentiometers
> replacing. Oh, and I need to find two self-tapping (?) screws to hold the
> side panels on. Bleagh.
>
> Later.
> --
> Phil. | Acorn Risc PC600 Mk3, SA202, 64MB,
6GB,
> philpem_at_dsl.pipex.com | ViewFinder, 10BaseT Ethernet,
2-slice,
> http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
> ... Growing old is mandatory; growing up is optional!!
Received on Sat Jul 03 2004 - 04:34:30 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:49 BST