----- Original Message -----
From: "Philip Pemberton" <philpem_at_dsl.pipex.com>
To: <cctalk_at_classiccmp.org>
Sent: Thursday, July 15, 2004 10:04 AM
Subject: Re: Mitsubishi Monitor
> I'm still trying to find a way to make a hole in a plastic panel to mount
a
> BNC properly. I failed miserably on the frequency counter I made - the BNC
> connector spins while you're trying to plug a probe in. Oops.
Usually there's a flat section on the BNC socket , I usually drill a smaller
hole and then file out to suit - especially easy in plastic. Otherwise look
for a purpose made chassis cutter for BNC connectors - could be pricey.
>
> Later.
> --
> Phil. | Acorn Risc PC600 Mk3, SA202, 64MB,
6GB,
> philpem_at_dsl.pipex.com | ViewFinder, 10BaseT Ethernet,
2-slice,
> http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
> ... DANGER! DANGER! Computer Store Ahead, Hide Wallet.
Received on Thu Jul 15 2004 - 04:32:23 BST