Commodore Pet ROM trouble...

From: wolfgang_at_eichberger.org <(wolfgang_at_eichberger.org)>
Date: Wed Jul 21 00:55:42 2004

Hi,

a couple of days ago my Pet 2001N (the 2000 Model without
the cricklet-keys) gave up :(. See
http://www.portcommodore.com/commodore/pet/petfaq/models.html
for reference. It's the 2nd machine from top, equipped with
32k RAM. When trying to boot it puts random characters on
screen. As far as I found out this _should_ be a ROM-Problem
(could be RAM too, but I hope it's ROM as I ran a Ram-Test
successfully before the Pet died). I would like to try
replacement ROMs before I have to use one of these
replacement solutions plugging a little board into the CPU
socket and providing it's own ROM and RAM. Could somebode
please provide me some Info, what Eproms I could use as
replacement for the original Commodore ones (Basic 4)? I'm
also a bit confused what image I should use (see
http://www.funet.fi/pub/cbm/firmware/computers/pet/index.html)...

As you see, I have a lot of questions. Please excuse my
horrible english. I'd be habby about every hint, trick etc...

Best regards,
 Wolfgang Eichberger

PS: It'd be great too, if somebody could provide me burnt
roms as my only eprom-burner is for C=64.




====================================================
Ing. Wolfgang Eichberger cell.: +43-664-240-65-92
                           http://www.eichberger.org
                      email: wolfgang_at_eichberger.org
----------------------------------------------------
Gruentalerstr. 24 - 4020 Linz ? AUSTRIA
====================================================
Received on Wed Jul 21 2004 - 00:55:42 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:52 BST