Mitsubishi Monitor

From: Tony Duell <ard_at_p850ug1.demon.co.uk>
Date: Thu Jul 22 17:38:48 2004

>
> On Wed, Jul 14, 2004 at 11:38:45PM +0100, Tony Duell wrote:
> > >
> > > Hello:
> > > I need some advise, if someone can please help me out regarding
> > > identifying what this monitor is for. I have been given an older 20'
> > > Mitsubishi monitor with two 15 pin connectors on the back (signal A, Signal
> > > B) along with 5 of the round connectors with the two pins on each. Each
> >
> > Are you sure it's 2 pins? These sound like BNC [1] connectors which have
> > one central pin and the shield. Some sockets have a forked contact for
> > the centre connection which may look like 2 pins, though.
>
> Something wrong with the quoting there Tony ...

Why? The lines starting with 3 greater-thans are the original message, 2
greater-thans are my reply to it, 1 greater than is your reply to that,
no greater-thans is my current message. Looks OK to me.

> Anyway, There are the two locking "pins" on the sides of BNC
> connectors. Perhaps these are what are being mentioned.

Yes, another follow-up message indicated this was the case.

-tony
Received on Thu Jul 22 2004 - 17:38:48 BST