DEC AXV11 A/D Board Connector Pinout Wanted

From: Douglas Taylor <dj.taylor_at_starpower.net>
Date: Sun Jul 25 20:34:21 2004

Thanks to both of you, I happened to have that MicroPDP book but failed to
look. BTW, it did say that there was no cabinet kit for the AXV11 so I
guess you build your own..
Doug


At 10:44 PM 7/22/2004, you wrote:
>Douglas Taylor wrote:
>
>>As you can tell from the heading I have one of these boards. In the DEC
>>Micronotes there are some simple programs that show you how to acquire
>>data with it, however I don't know how you connect the board to outside
>>sources for sampling,etc. Anyone have info? I think I saw something in
>>the Vax 4000/200 manuals that talked about a cabinet kit for this board -
>>a UDIP - does this ring any bells?
>>
>>Doug
>>
>The Micro PDP Handbook says that the connector is a 26 pin header. From
>the layout it must be an 8 channel differential A/D or a 16 channel single
>ended A/D.
>
>pin
>1 ch0
>2 ch8 or return 0
>3 ch1
>4 ch9 or return 1
>5 ch2
>6 ch10 or return 2
>7 ch3
>8 ch11 or return 3
>9 ch4
>10 ch12 or return 4
>11 ch5
>12 ch13 or return 5
>13 ch6
>14 ch14 or return 6
>15 ch7
>16 ch15 or return 7
>17 analog ground
>18 AMP (I don't know what that means)
>19 external trigger in
>20 digital ground
>21 real time clock in
>22 digital ground
>23 DAC A return
>24 DAC A out
>25 DAC B return
>26 DAC B out
>
>
Received on Sun Jul 25 2004 - 20:34:21 BST