Old EPROM questions again, EPROM Programmer

From: wolfgang_at_eichberger.org <(wolfgang_at_eichberger.org)>
Date: Tue Jul 27 12:20:22 2004

Hi all,
 
first I want to thank you for your nice and fast help with
my Commodore Pet ROM
problem. Now I have a little question for my personal
Interest:
There were many Eprom Programmers back when the 2532 etc.
were actual which
were designed for popular homecomputers (I own one for my
Pet too and know
of many for C=64). Many of these devices were "homebrewed
gear" or sold as
kits. But after lots of time googling around I haven't
found much stuff
about this old eproms. Okay, I have at least a bunch of
datasheets and some
schematics where ex. the 2532 were used and learned a lot
of early 1980's
hardware basics :) But I could not find some schematics
(and software) of
Eprom programmers dedicated to this chips. My (maybe dumb)
question: Does
anyone have some schematics and software (would be great)
for a little
homebrewed Eprom Programmer which works with a standard PC
parallel-port or
ISA slot? This would be a great project for rainy winter
days :)
 
Best Regards,
 Wolfgang
  




====================================================
Ing. Wolfgang Eichberger cell.: +43-664-240-65-92
                           http://www.eichberger.org
                      email: wolfgang_at_eichberger.org
----------------------------------------------------
Gruentalerstr. 24 - 4020 Linz ? AUSTRIA
====================================================
Received on Tue Jul 27 2004 - 12:20:22 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:52 BST