SCSI cable

From: fire_at_dls.net <(fire_at_dls.net)>
Date: Fri Jun 11 11:40:37 2004

VaX enthusiasts,

I finally managed to get QBus SCSI card for my MicroVax II thanks to Ebay.
It appears like it will fit in fine. It says KZQSA M5976-SA on the side. It has two Centronix-50 Female connectors on it. Question is what is easiest way to connect this to internal full-height DEC SCSI drive with standard 50-pin connector. Get a f-f gender connector and a cable with Centronix-50 F connector on one end and ribbon with internal connectors along it, and terminator at end?

I cannot recall what model DEC drive this is, but I thought it was 4GB. How do I find DEC Drive model? I see numbers 74046725-0 A01 GM on side rail, 70-2988501 on top of drive, Model DSP5400S Rev RH12E-CY A01 on back of rail, and another label on the back of drive reading KB34426075 R-75. Board says 54-21265-06 A05 and ZG40516250 and 74P6 and Side 2 5021264-06 A01

I used to like programming in C and Fortran on this machine and the drive died a few years ago. I was hoping to load VMS on to the new big disk and have lots of space to play around in.

Thanks for your assistance,

Bradley Slavik
Received on Fri Jun 11 2004 - 11:40:37 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:57 BST