need hex prom code or source for Intel MDS-800 monitor

From: Joe R. <rigdonj_at_cfl.rr.com>
Date: Fri Jun 18 18:48:54 2004

Hi Steve,

  I got your message about this too. But I've been busier than a cat
covering S***! I've got a couple of working MDss but they're all covered
with other junk, er, future projects. What kind of Multibus chassis are
you looking for? I have a couple of gutted MDS-225s but I gave away the
only non-working MDS-800 chassis that I had. I also have several six slot
card cages with backplanes but no power supplies or anything else attached
to them. Will they do for what you want?

  I've got two working MDS-800s sitting in my living room at the moment but
the PC that I was using for a terminal croaked and I need to set up another
one. It shouldn't take long but neither would half of the other 500
projects waiting to be done.

    Joe


At 03:47 PM 6/18/04 -0700, you wrote:
>
>Hi Steve
> I've got the source someplace if Joe doesn't come up with
>it before I do. Of course, I should be able to do a ROM
>dump but I'll be busy with a couple things this and next
>weekend.
>Dwight
>
>>From: "Steve Thatcher" <melamy_at_earthlink.net>
>>>
>>I have finally had time to start bringing up my Northstar Horizon system.
What
>I was hoping was that someone had the hex prom code or source for the Intel
>monitor in the MDS-800. In past time, I actually had ISIS-II running on a
>Northstar system and it requires a Intel style monitor program at 0f800H.
Once I
>get access to my 8" disks again, I will be able to supply modified source
that
>would allow someone else to do the same thing.
>>
>>best regards, Steve Thatcher
>>
>
>
>
>
Received on Fri Jun 18 2004 - 18:48:54 BST