ASR-33 H-Plate

From: CPUMECH_at_aol.com <(CPUMECH_at_aol.com)>
Date: Fri Jun 25 10:39:58 2004

You can reset the keybd. by pushing down on the lever on the front right
corner of the keybd. and it should latch in the down position. Then if the H lever
still won't line up you can trip the distributor clutch and the rotate the
motor which will then turn the distributor clutch, which will rotate the arm for
the H lever to line up on the same plane. If you have any questions call
Dataterm Inc.-they are very knowledgeable with 33 TTY's and have many parts for
Teletypes too.- 781-938-1010
Received on Fri Jun 25 2004 - 10:39:58 BST