Storage Hazards

From: Tom Jennings <>
Date: Fri Oct 8 19:32:28 2004

On Fri, 8 Oct 2004, Ron Hudson wrote:

> > Oh, LK201s are easy to take apart (Unclip all the keycaps, then cut off
> > the heat-stakes on the back and take it all apart). It's getting them
> > back together that's 'interesting' (there's not enough plastic left to
> > re-do the heat staking).

> On Oct 8, 2004, at 3:57 PM, Tony Duell wrote:

> Could you break off what remains of the stake and replace it with a long
> screw, 2 washers and a nut? (is there room underneath?)

You could try: put the PC board back over the tops of the stakes,
drill a hole where the post used to stick up, and use a tiny
sheet metal screw instead. I use a pin vise for things like this.
Received on Fri Oct 08 2004 - 19:32:28 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:37:21 BST