[Posibly OT?] Tek 321A scope needs help....

From: Richard Beaudry <r_beaudry_at_hotmail.com>
Date: Sat Sep 18 11:29:08 2004

Hello all,

I recently became the new owner of a Tek 321A scope, but it needs some
repairs. Also, I have no manuals, so if anyone could loan me an operator's
manual or service manual so I could make a copy, I'd appreciate it....

The main issue is the display. There is what I can only describe as a
"cloud" that runs vertically along the center of the display. Varying the
intensity and focus does vary this cloud, but it is still present. Also,
the trace line is visible, but very out of focus. Wider at the edges, and
narrower in the middle. I can take a picture if this makes no sense...

I don't know the working condition of the scope, but it was put in a large
bin for disposal. It's possible that it was just tosseed in, so it may have
been banged around a bit.

It seems a shame to toss this unit, as it is in pristine physical condition.
The battery holders are very clean, and the unit has no dust or dirt that I
can see....

If this is a common problem, or if it seems fixable, let me know what to

Rich B.
Received on Sat Sep 18 2004 - 11:29:08 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:37:30 BST