No subject

From: <bogus_at_does.not.exist.com>
Date: Sun Feb 27 13:35:59 2005

if the power supply droops - I feed mine from a 13.8 volt battery/charger
combination (overkill - 11 Amp capacity!) and I get those symptoms when the
12VDC input connector isn't seated right. Open up and read the voltages on
the power connector for one of the disc drives - I suspect both the 5V and
12V lines will be sagging: below 4.75V or 11.5V and you can expect problems.

Bob

>From: "Keith Hymas" <keithhymas_at_hotmail.com>
>To: <cctech_at_classiccmp.org>
>Subject: Orpahaned PPC640
>Date: Mon, 15 Sep 2003 15:24:21 +0100
>Reply-To: cctech_at_classiccmp.org
>
>Hi, I have found a PPC640 abandoned and homeless, just the PPC nothing
else.
>Plugged in a power supply and turned on. Lights, camera, action. Sort off.
>The yellow LED beside the CRT label is on and steady and the red power LED
is
>on and steady also. The built-in speaker however is continuously beeping.
The
>volume control has no effect, surprise, during the attempted boot up.
>That's it nothing else. No LEDs turn on for drives A or B. No display
changes
>on the built in monitor.
>...
>Keith
Received on Sun Feb 27 2005 - 13:35:59 GMT