On Mon, 21 Feb 2005, Jochen Kunz wrote:
> But there is one problem left. A hex UniBus board is larger then my
> scanner (ScanJet 4c, A4 / letter). So I scanned the upper 2/3 of the hex
> UniBus board and then the lower 2/3. What I now need is a software that
> pastes this two pictures into one. The software _must_ run under NetBSD
> or IRIX.
Good luck. This can be very challenging due to the inevitable distortion
that prevents the two halves from lining up properly. It can be done but
it takes a lot of work.
Too bad you aren't local...I have a bunch of scanners that can accomodate
8.5x17, and I don't want to scrap them if I can avoid it.
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
[ Old computing resources for business || Buy/Sell/Trade Vintage Computers ]
[ and academia at www.VintageTech.com || at http://marketplace.vintage.org ]
Received on Mon Feb 21 2005 - 15:52:53 GMT