epson hx-20 problems

From: SUPRDAVE_at_aol.com <(SUPRDAVE_at_aol.com)>
Date: Sat Dec 12 12:23:51 1998

my little hx20 is doing strange things, perhaps someone can help.
when i power up i get two beeps, then the lcd shows:

ctrl/_at_ initialize
1 monitor
2 pcn
3 ok
  

and choices 4-6 show nonsense characters. choosing any choice drops me to a
register dump and the word TRAP! hitting the menu key gives me the initial
bootup choices listed above. i noticed there was two access doors underneath
which i opened all push down all all the socketed chips but no improvement. i
hit the reset b utton and that does nothing. at least the printer paper feed
works! any ideas? should i disconnect the expansion unit?

david
Received on Sat Dec 12 1998 - 12:23:51 GMT