> OK, despite your warnings, I pulled my AT motherboard out of its case
> and put it into the PS/2 tower case. It fits reasonably well
> physically, but I AM having a bit of trouble with the power supply
> conversion. I have pretty much figured out how to wire the psu
> to the motherboard, but the problem is the power good line. What
> is it, and what would I need to hook it up to for the PSU and MB to
> think that the power is good? (this is line 1 of P8 on most AT
> motherboards)
Huh? What is that AT motherboard you're using in that PS/2 60?
Well, There problems of card cage size and height, making new
standoffs and all is not worth trouble doing. :(
That is why I suggested this whole board upgrade by a company in this
PS/2 60 case or different machine case that will take standard AT
boards.
Trust me, I have done few hackings to nonstandard cases to take
standard boards, NOT FUN!
Just my comments.
Jason D.
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
>
email: jpero_at_cgo.wave.ca
Pero, Jason D.
Received on Sun Mar 08 1998 - 13:06:47 GMT