1518 and 1538, full manual for both wanted.

From: jpero_at_cgocable.net <(jpero_at_cgocable.net)>
Date: Sat Apr 10 16:40:00 1999

Needs to be full info on all jumpers used on the HDs. Here's the
problem I'm having.

I'm using Ultrastor 12F-24 controller. This is 24Mb rated card for
these two drives.

I can't get r/w after LLF with onboard bios of that card, but I can
work with the either HD's and I'm sure the 20pin cable (did removed
connectors, cutoff "bad" part then recrimped) is good and PSU is
healthy. The controller can pull up the hd specs correctly.

The sector type selection is correct for the PC use but I think some
other jumper settings is not correct for this. Might was setup for
non pc applications but uses same 512 sector type on one and
different sector size on other.

Thanks!

Details:

1538 is .9 GB formatted, part #XS0030-01-7E

UK 1518 is 1.3 GB formatted, part #TS0021-01-1

NOTE: tried .go2net.com search, theref and blue planet with little
luck.

Wizard
Received on Sat Apr 10 1999 - 16:40:00 BST