1518 and 1538, full manual for both wanted.

From: Don Maslin <donm_at_cts.com>
Date: Sat Apr 10 18:10:05 1999

On Sat, 10 Apr 1999 jpero_at_cgocable.net wrote:

> Needs to be full info on all jumpers used on the HDs. Here's the
> problem I'm having.
>
> I'm using Ultrastor 12F-24 controller. This is 24Mb rated card for
> these two drives.
>
> I can't get r/w after LLF with onboard bios of that card, but I can
> work with the either HD's and I'm sure the 20pin cable (did removed
> connectors, cutoff "bad" part then recrimped) is good and PSU is
> healthy. The controller can pull up the hd specs correctly.
 
You did FDISK and FORMAT, did you not. Or am I misunderstanding your
problem.
                                                 - don

> The sector type selection is correct for the PC use but I think some
> other jumper settings is not correct for this. Might was setup for
> non pc applications but uses same 512 sector type on one and
> different sector size on other.
>
> Thanks!
>
> Details:
>
> 1538 is .9 GB formatted, part #XS0030-01-7E
>
> UK 1518 is 1.3 GB formatted, part #TS0021-01-1
>
> NOTE: tried .go2net.com search, theref and blue planet with little
> luck.
>
> Wizard
>
Received on Sat Apr 10 1999 - 18:10:05 BST