"DB9"

From: Richard Erlacher <edick_at_idcomm.com>
Date: Wed Dec 15 16:38:31 1999

The way I learned it was that the 'D' refers to the shape, the 'B' to the
shell size, and the number to the maximal pin count. The spacing is not
.050" however. It seems to me that it's larger than 0.10" andnot less,
except in the high-density versions like the DE15.

Dick
-----Original Message-----
From: Truthan,Larry <truthanl_at_oclc.org>
To: Discussion re-collecting of classic computers
<classiccmp_at_u.washington.edu>
Date: Wednesday, December 15, 1999 2:50 PM
Subject: RE: "DB9"


>Belden Calls them all D-Subminiature connectors either Plugs or Sockets
>(Jacks) in 9, 15, 25, and 37 pins. Metal Head shells or thermoplastic.
>Having .050" centered conductors.
>
>DSP009 is 9 pin plug
>DSJ009 is 9 position jack (socket)
>
>Were there Standards, or was this left to Mfg part numbering scheme??
>Molex, Amphenol, Thomas & Betts, Ansley? Mil Spec?
>
>Larry Truthan
>
>
>
>-----Original Message-----
>From: Fred Cisin (XenoSoft) [mailto:cisin_at_xenosoft.com]
>Sent: Wednesday, December 15, 1999 4:26 PM
>To: Discussion re-collecting of classic computers
>Subject: "DB9"
>
>
>On Wed, 15 Dec 1999, Tony Duell wrote:
>> Thank %deity there's somebody else out there who actually knows what a
>> 'DB' connector is!. I sometimes think I'm fighting a losing battle
>> against the people who insist there's a DB9 :-)
>
>How large would the pins be, or how far apart if there WERE a DB9?
>Or what about a DB25 serial port cable that only has pins 1-8 and 20?
>Could we call THAT a DB9? :-)
><snip>
>
>>
Received on Wed Dec 15 1999 - 16:38:31 GMT