xylogics smd interface for pdp11

From: Jacob Ritorto <jritorto_at_nut.net>
Date: Tue Jul 27 22:15:26 1999

Would someone please provide docs or setup info for the following
scantily-marked unibus SMD controller:

Xylogics #300-101-600 rev B L6

doc. pkg. no. 300-101-902 Rev G serial no. 1103

A few hand-written and typed labels are still attached to the socketed
chips (presumably geometry/emulation codes):
[handles forward, components up, edge connector facing you]

along the left side, column of 8 big chips.
4th down: " 766/BU4 "
6th down: " 768/BU4 "

six inches in from left; four inches down from handles, by itself
: " -173E "

slightly right of center; starting three inches down; column of four chips
: " 242D "
: " 245C "
: " 244C "
: " 243C "

just below those, group of six chips, most missing their labels but top
right is still there and reads : "799HC "

That's all I can glean. Seems to show up as DM: under rt, but I don't
know what size/shape of drive it expects or what partitioning it's willing
to perform...

BTW, Thanks John if you're lurking here somewhere...

TIA

jake
Received on Tue Jul 27 1999 - 22:15:26 BST