vax behaviors

From: Chuck McManis <cmcmanis_at_mcmanis.com>
Date: Mon Mar 8 16:11:42 1999

AAAAAAAAAAARGH!

I hate this, everything seems to be going fine and then suddenly nothing
seems to work.

I've decide to focus on the BA123 housed uVax.

I power it up and get no response on the terminal. The CPU board has four
red LEDs (all lit) and there are three LEDs on the ethernet (also lit).

The HEX display on the back of the unit says "F."

The front has the red HALT light illuminated, DC OK is _not_ illuminated.

My slots are :

          +-----------------------------+
        1 | CPU (KA630) conn |
          +-------------------||--------+
        2 | MEMORY 4MB conn |
          +-------------------||--------+
        3 | MEMORY 4MB conn |
          +-----------------------------+
        4 | M7516 | M9047 |
          +-----------------------------+
        5 | Viking QTO | - blank - |
          +-----------------------------+
        6 | - blank - |
          +-----------------------------+
        7 | WQESD (Sigma RQ11) |
          +-----------------------------+
                8 - 12 blank


No obvious smell of smoke, just dust.

What can I check ?

--Chuck
Received on Mon Mar 08 1999 - 16:11:42 GMT