TQK70 Jumpers

From: Bruce Lane <kyrrin_at_bluefeathertech.com>
Date: Fri Dec 22 00:18:54 2000

        I already asked this on port-VAX, figured I'll try here, too.

        Can anyone provide one of the following:

        1). Confirmation or denial that the address jumpers on the TQK50 (M7546)
and the TQK70 (M7559) are laid out in the same pattern, bit-wise? In other
words, does each board share the same pattern for setting its address?

        2). A jumper chart for the TQK70, or jumper setting info to set it to the
primary tape device address.

        Thanks much.

Bruce Lane, Owner and head honcho, Blue Feather Technologies
http://www.bluefeathertech.com // E-mail: kyrrin_at_bluefeathertech.com
Amateur Radio: WD6EOS since Dec. '77 (Extra class as of June-2K)
"I'll get a life when someone demonstrates to me that it would be
superior to what I have now..." (Gym Z. Quirk, aka Taki Kogoma).
Received on Fri Dec 22 2000 - 00:18:54 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:50 BST