Reviving a MicroVAX II

From: allisonp <>
Date: Sun Jul 2 06:57:10 2000

From: Chuck McManis <>

>I'd recommend a nice ESDI controller (Dilog 696-20 or RQ11D/E
>(Webster/Sigma/etc) If you can find a RRD-40 interface (CD-ROM) that
>be good to since VMS from CD is easier to load than VMS from TK50
>done both recently I really recommend CD). If you can find (good luck!)
>SCSI controller for it then your options are pretty much wide open. BTW
>lives very nicely on a 500 - 600MB disk with lots of layered products.

Chuck, a SCSI board with one good drive and a CDrom would be likely a
choice depeding on what can be found. I used this combo CMD200, RZ56
and toshiba Cdrom.

Received on Sun Jul 02 2000 - 06:57:10 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:32:55 BST