Kaypro 10 Western Digital Hard Disk Controller WD 1002-HD0

From: Richard Erlacher <richard_at_idcomm.com>
Date: Mon Jul 17 09:59:51 2000

I have lots of information but no schematics. The WD1002-HDO is the
HDO-version (hard disk only) of the popular WD1010-based HDC. It is common
enough, but I'll be happy to email you the data sheet/manual if you want as
I did scan the thing last year. The file's BIG, however, since the scans
are in bitmapped format.

Dick.
----- Original Message -----
From: Bill Dawson <whdawson_at_mlynk.com>
To: Classiccmp_at_Classiccmp. Org <classiccmp_at_classiccmp.org>
Sent: Monday, July 17, 2000 3:58 AM
Subject: Kaypro 10 Western Digital Hard Disk Controller WD 1002-HD0


> Hello all,
>
> I need any technical information anyone may have for this hard drive
> controller board, especially schematics. I have all the other technical
> docs for the Kaypro 10. This board is not in the documentation I
> already have because it was not considered to be field or factory
> repairable.
>
> WD 1002-HD0 61-031050-00 REV Y 8, 1893 Western Digital
>
> It connects via 40 pin IDC and ribbon cable to the Kaypro main board and
> to either 1 or 2 ST-506 10mb MFM drives.
>
> LSI on board includes WD1014AL-00, WD1010AL-00, WD1015-00, and SY2128-2.
>
> I've already searched the web and found some general information, some
> helps, most doesn't.
>
> Thanks again,
>
> Bill
>
> Bill Dawson
> <mailto:whdawson*at*mlynk.com> <- Anti-spam protection
>
> Your computer will do far more than you ever expected it to,
> and that won't be enough.
>
> Pournelle's First Law
>
>
Received on Mon Jul 17 2000 - 09:59:51 BST