Or check ebay occasionally, since one appears to be available there
right now:
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1212016224
-Lawrence LeMay
> Soldering them to a mating socket via some RG59 should work. Crimp 3 bnc's
> on each of three cables and solder them to the respective pins on the other
> connector. These cables, IIRC normally cost $18-$25 at the local computer
> store, however. It may not be worth the extra work to you.
>
> Dick
> ----- Original Message -----
> From: "Fred deBros" <fdebros_at_bellatlantic.net>
> To: <classiccmp_at_classiccmp.org>
> Sent: Sunday, February 04, 2001 6:32 PM
> Subject: 3w3 to bnc video connection
>
>
> > the one used on mips machines and vax 4000/vlc, three small coax (male)
> > connectors side-by-side in a receptacle....is there a way to "jerry rig"
> > these sub-d coax plugs and connect them to 3 bnc's without just soldering
> > them in?
> > I can't seem to find a 3w3to bnc videocable anymore....
> >
> > Where would I find the matching small coax (female) plugs?
> >
> > Fred
> >
> >
>
Received on Sun Feb 04 2001 - 20:03:28 GMT