[OT] SCSI termination trouble?

From: Richard Erlacher <edick_at_idcomm.com>
Date: Fri Feb 9 10:45:48 2001

The boot drive normally IS at ID=0, however. That's a real convention
throughout the SCSI usage. I don't recall ever seeing a system that would
boot, say, from ID=4. Most PC's will promote the ID=1 device to the boot
rank, but not if ID=0 is present but manlfunctioning. YMMV, of course.

Dick

----- Original Message -----
From: "Marvin" <marvin_at_rain.org>
To: <classiccmp_at_classiccmp.org>
Sent: Friday, February 09, 2001 9:22 AM
Subject: Re: [OT] SCSI termination trouble?


>
>
> liste_at_artware.qc.ca wrote:
> >
> > On 09-Feb-2001 Marvin wrote:
> > >
> > > I am not familiar with Macs except the ones we get at the Golden
Arches,
> > > but IIRC, ID 0 is reserved for the SCSI controller. Have you tried
> > > putting it on another SCSI ID?
> >
> > No ID is "reserved". The controller can have any ID, though generaly
it's
> > 7.
>
> Thanks, I had the wrong end :). Reserved is by convention and my
experience
> is that changing standards for the sake of changing things just makes it
> harder on anyone else who has to troubleshoot a system.
>
>
Received on Fri Feb 09 2001 - 10:45:48 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:44 BST