Emulex woes

From: no <oliv555_at_arrl.net>
Date: Tue Feb 20 17:50:17 2001

Chuck McManis wrote:
>
> At 10:26 AM 2/20/01 -0600, you wrote:
> >Anyone had success in using this board with the PDP11? I've set the
> >address to 172154 as the M7555 is still onboard to allow the rx33 as
> >the boot device. Will the DEC diags format the SCSI (i expect not)?
>
> Did you mean you set it for 760330 rather than 172154? You want to set it
> as the second MSCP disk controller since the M7555 is still there. It will
> be 'dubx' in VAX parlance, not sure what it would show up as on the '11.
> Also you probably have to sysgen the system to know about it.
>
> --Chuck

I'll try some other addresses tonight; under rt11 it should just appear
in the device list using *SHO ALL*. Never had it operational in my mVax
so there is the possibility i've a bad board.

thanks, nick
Received on Tue Feb 20 2001 - 17:50:17 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:33:45 BST