macintosh analogue board reconditioning

From: Mike Ford <mikeford_at_socal.rr.com>
Date: Fri Oct 26 02:28:22 2001

>> Tony, I'm a module swapper because that's what I know, and usually the
>
>Well, if you want to swap modules, then replace the analogue board, which
>is where the fault almost certainly is :-)

This is a case where I think the board level repair is really called for.
In fact I recommend that people replace ALL of the known failure mode parts
with better quality modern units, clean up all the known poor solder joints
etc., and service the floppy drive.

Do the job once, do it right, and never have to worry about it again.
Received on Fri Oct 26 2001 - 02:28:22 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:20 BST