>I just picked up an Amiga Video Toaster (just the CPU unit). Inside on the
>left are the video toaster cards, but the two right-most slots have
>full length
>cards made by Digital Processing Systems Inc. The cards are daisy
>chained to a connector on the motherboard. Each card has four BNC
>connectors, a 5-pin DIN, an RJ-11 jack and a three-position switch on the
>rear slot panel. The back side of each card is covered with a full-length
>aluminum shield. The only identifying numbers I've found, besides the
>FCC ID, is "743-770", then "PT2 REV-3, Made in Canada".
Good score. The boards sound like the TBC IV or TBC IV Plus.
The BNC's should be:
video in, video out, timing in, timing out.
The RJ-11 should be the serial connection and the 5-pin DIN
should be the S-video in. You could supposedly have up to four of
these boards daisychained together.
Of course, I could be wrong <g> That's what it sounds like though.
Jeff
--
Home of the TRS-80 Model 2000 FAQ File
http://www.cchaven.com
http://www.geocities.com/siliconvalley/lakes/6757
Received on Thu Aug 22 2002 - 16:30:01 BST